Algebra ( Period 1)

Chapter 3-3 Rate of Change and Slope

We’ve already looked at the slope (m) of lines—today we will connect slope to the RATE of the CHANGE of the linear function (the line). the rate of change for a line is a CONSTANT… it is the same value EVERYWHERE on the line

This change, also know as the slope, is found by  finding the rise over the run between ANY 2 points.  rise/run

The rise is the change in y and the run is the change in x.

In a real world example, the rate of change is the UNIT RATE

If you are buying video games that are all the same price on BLACK FRIDAY, two data points might be

# of computer           Total
games                          cost

4                                  $156
6                                  $234

The slope or rate of change  is the  change in y/ the change in x

(234- 156)/ 6-4

78/2

or $39/ video game

Again, as long as the function is linear, or one straight line, it has a constant rate of change, or slope between ANY TWO POINTS

The constant rate of change, or slope, is the rise over the run—or the change in y over the change in x

or
y₂ – y₁/ x₂-x₁ 

Slope = rise/run ( rise over run)
=change in the y values/ change in the x values =
Difference of the y values/ Difference of the x values

Mrs Sobieraj uses “Be y’s first!” Be wise first!  meaning always start with the y vales on top (in the numerator)

TWO WAYS OF CALCULATING on a graph:

       1) Pick 2 points and use the following formula
Difference of the 2 y –values/ Difference of the 2 x-values
The formal is restated with SUBSCRIPTS on the x’s and y’s below: (memorize this) y₂ – y₁/ x₂-x₁  The subscripts just differentiate between point one and point two. You get to decide which point is point one or two. I usually try to keep the difference positive, if I can—but often, one of them will be negative and the other will be positive.

EXAMPLE:   ( 3, 6)  and (2, 4)    y₂ – y₁/ x₂-x₁       6-4/3-2 = 2/1 = 2

    2)Count the slope on the GRAPH using rise over run.
From the point (2,4) count the steps UP ( vertically) to (3,6): I get 2 steps
Now count how many steps over to the right (horizontally): 1 step
Rise = 2 and Run = 1 or 2/1 = 2

HORIZONTAL LINES  have only a y intercept (unless it’s the line y = 0 and then that is the x-axis) The equation of a horizontal line is y = b where b is a constant. Notice that there is NO X in the equation. For example y = 4 is a horizontal line parallel to the x-axis where the y value is always 4 What is the x value? All real numbers! Your points could be ( (3, 4) or ( 0, 4) or ( -10, 4)
Notice y is always 4! The constant rate of change  or slope is 0

If you take any 2 points on a horizontal line the y values will always be the same so the change ( or difference) in the numerator = 0.

EXAMPLE  y = 4

Pick any two points Let’s us ( 3,4) and (-10, 4)

(4 - 4)/ (3 - ^-10) becomes ( 4-4)/ 3 + 10 = 0/13 = 0

VERTICAL LINES ( which are NOT functions)  have only an x intercept ( unless it is the line x = 0 and then it is the y-axis) The equation of a vertical line is x = a, where a is a constant. Notice that there is NO Y in this equation.

EXAMPLE: x = 4

This is a vertical line parallel to the y axis 4 steps to the right of it. Pick any two points on this line Let’s use ( 4, -1) and (4, 7)

This time the change in y is -1  - 7 = -8

and the change in x is 4 -4 = 0

BUT -8/0 is UNDEFINED

Make sure you write undefined for the slope!

Finding a Missing Coordinate if you know 3 out of 4 values and the Slope

Say you know the following:
(1,4) and (-5, y) and the slope is given as 1/3

Find the missing y value

Use the slope formula

Change in y/ change in x

(y – 4)/- 5 – 1  and you know that the slope is 1/3

That means

(y – 4)/- 5 – 1   = 1/3

(y – 4)/-6 = 1/3

Solve

3(y -4)= -6

3y – 12 = -6

 y = 2

Or you could have divide both sides by 3 FIRST

y - 4 = -2

y = 2

Algebra Honors (Period 4 & 7)

Chapter 3-4 Direct Variation

We’ve learned that the unit rate is the constant rate of change in a linear relationship and that it’s the slope of a line when it’s graphed. We’ve also learned that if a graph of an equation goes through the origin (0,0)  it’s proportional  and the ratio of any y value to it’s x value is a constant (which turns out to be the unit rate or constant rate of change or slope of the line)

When the linear relationship is proportional, we say it’s a DIRECT VARIATION. Now the constant rate of change, the slope, the unit rate, is called the CONSTANT OF VARIATION or the CONSTANT OF PROPORTIONALITY

This is not a new concept. IT IS  just NEW VOCAB!

We also say: y varies directly (constantly) with x.

The slope is now replaced by the letter k instead of m

Finding the equation of a line that is proportional

Find k (the slope) by counting the rise/run of the graph

Write the equation using the format  y = kx

Notice: if you always pick the origin as the point to count rise/run from—the slope (k) is always just y/x

In a word problem, if it says one amount VARIES DIRECTLY with another, you know that the origin is one of the points!!

You also know that the equation is y = kx
YOU just need to find k
and k is y/x of any point OTHER THAN THE ORIGIN

A babysitting example

The amount of money earned  VARIES DIRECTLY with the time worked.

THINK: the graph and equation go through (0,0)

THINK: Any other point will give you the slope, or constant of proportionality, or unit rate ( all the same thing) SO you only need one additional point.

We are given that she earns $30 for 4 hours. Find the equation.

Rise/Run = y/x
BECAUSE THEY SAID IT VARIED DIRECTLY!!

k = 30/4
Simplify
k = 7.5
So the equation is y = 7.5x

What does the 7.5 represent?
The unit rate of $7.50/ hour of babysitting!

A bicycling example 
The distance the cyclist bikes in miles VARIES DIRECTLY with the time in hours that he bikes.

THINK: The graph and equation go through the origin (0,0).THINK: Any other point will give you the slope, or constant of proportionality, or unit rate (all the same thing) SO you only need one additional point.

He bikes 3 miles in ¼ hour. Find the equation.

Rise/run = y/x
BECAUSE THEY SAID IT VARIES DIRECTLY

k = 3/¼  or 3/.25 Now the hardest part is doing this 3/.25

If you kept it as 3/¼  you could read this as 3 divided by ¼
THINK: instead of dividing, multiply by the reciprocal of ¼

or 3 (4/1) = 12 (Wait, wasn’t that much easier than dividing 3 by .25!!
k = 12

The equation is y = 12x

What does the 12 represent?

The unit rate of 12 miles/ hour – that’s the cyclist’s speed 12mph

  Determining whether a Table of Values is Direct Variation If you are given a table of values, you can determine if the relationship is direct variation by dividing 3 y’s by their x values and making sure that you get the SAME value. If you do, it is proportional, goes through the origin (0,0) and the slope of y/x is the unit rate ( which is now called the constant of variation)!

Example

Given 3 points (5, 20) , (6, 24), and (7, 28):

Divide each y/x

20/5 = 4

24/6 = 4

28/7 = 4

Since all the ratios simplify to the same value (4), it is a direct variation. The slope of 4 is the unit rate, which is the constant rate of change and is now also called the constant of variation.

Finding Additional Values for the Direct Variation once you have the EquationOnce you have the equation y = kx, you can find infinite additional values (points) that will work.
For example, in the first babysitting example, the equation is y = $7.50x, which we write as y = 7.5x  If she babysits for 20 hours, how much did she earn?
x = 20

so y = 7.5(20) = 150 so She earns $150.
If she earns $750, how many hours did she need to work?

Now y = 750  so  750 = 7.5x
It is a one-step equation and we get
x = 100 or 100 hours!

 Finding the Equation if you know 1 point and then Finding Additional Values

y varies directly with x. Write an equation for the direct variation. Then find each value

If y = 8 when x = 3, find y when x = 45

FIRST you need to find k

y = kx… In this case we have 8 = k(3) or 8 = 3k

Solve this 1 step equation—leaving it in fraction form!

8/3= k

so

y = (8/3)x

Now, find y when x = 45

y = (8/3)(45)

solve

y = 120

Applying direct variation to the Distance Formula d = rt

A jet’s distance varies directly as the hours it flies

If it traveled 3420 miles in 6 hours, how long will it take to fly 6500 miles?

k = 3420/6 = 570mph ( its speed)

6500 = 570t

t ≈11.4

about 11.4 hours

Algebra Honors ( Period 4 & 7)

Chapter 3-3 Rate of Change and Slope

We’ve already looked at the slope (m) of lines—today we will connect slope to the RATE of the CHANGE of the linear function (the line). the rate of change for a line is a CONSTANT… it is the same value EVERYWHERE on the line

This change, also know as the slope, is found by  finding the rise over the run between ANY 2 points.  rise/run

The rise is the change in y and the run is the change in x.

In a real world example, the rate of change is the UNIT RATE

If you are buying video games that are all the same price on BLACK FRIDAY, two data points might be

# of computer           Total
games                          cost

4                                  $156
6                                  $234

The slope or rate of change  is the  change in y/ the change in x

(234- 156)/ 6-4

78/2

or $39/ video game

Again, as long as the function is linear, or one straight line, it has a constant rate of change, or slope between ANY TWO POINTS

The constant rate of change, or slope, is the rise over the run—or the change in y over the change in x

or
y₂ – y₁/ x₂-x₁

Slope = rise/run ( rise over run)
=change in the y values/ change in the x values =
Difference of the y values/ Difference of the x values

Mrs Sobieraj uses “Be y’s first!” Be wise first!  meaning always start with the y vales on top (in the numerator)

TWO WAYS OF CALCULATING on a graph:

       1) Pick 2 points and use the following formula
Difference of the 2 y –values/ Difference of the 2 x-values
The formal is restated with SUBSCRIPTS on the x’s and y’s below: (memorize this) y₂ – y₁/ x₂-x₁  The subscripts just differentiate between point one and point two. You get to decide which point is point one or two. I usually try to keep the difference positive, if I can—but often, one of them will be negative and the other will be positive.

EXAMPLE:   ( 3, 6)  and (2, 4)    y₂ – y₁/ x₂-x₁       6-4/3-2 = 2/1 = 2

    2)Count the slope on the GRAPH using rise over run.
From the point (2,4) count the steps UP ( vertically) to (3,6): I get 2 steps
Now count how many steps over to the right (horizontally): 1 step
Rise = 2 and Run = 1 or 2/1 = 2

HORIZONTAL LINES  have only a y intercept (unless it’s the line y = 0 and then that is the x-axis) The equation of a horizontal line is y = b where b is a constant. Notice that there is NO X in the equation. For example y = 4 is a horizontal line parallel to the x-axis where the y value is always 4 What is the x value? All real numbers! Your points could be ( (3, 4) or ( 0, 4) or ( -10, 4)
Notice y is always 4! The constant rate of change  or slope is 0

If you take any 2 points on a horizontal line the y values will always be the same so the change ( or difference) in the numerator = 0.

EXAMPLE  y = 4

Pick any two points Let’s us ( 3,4) and (-10, 4)

(4 - 4)/ (3 - ^-10) becomes ( 4-4)/ 3 + 10 = 0/13 = 0

VERTICAL LINES ( which are NOT functions)  have only an x intercept ( unless it is the line x = 0 and then it is the y-axis) The equation of a vertical line is x = a, where a is a constant. Notice that there is NO Y in this equation.

EXAMPLE: x = 4

This is a vertical line parallel to the y axis 4 steps to the right of it. Pick any two points on this line Let’s use ( 4, -1) and (4, 7)

This time the change in y is -1  - 7 = -8

and the change in x is 4 -4 = 0

BUT -8/0 is UNDEFINED

Make sure you write undefined for the slope!

Finding a Missing Coordinate if you know 3 out of 4 values and the Slope

Say you know the following:
(1,4) and (-5, y) and the slope is given as 1/3

Find the missing y value

Use the slope formula

Change in y/ change in x

(y – 4)/- 5 – 1  and you know that the slope is 1/3

That means

(y – 4)/- 5 – 1   = 1/3

(y – 4)/-6 = 1/3

Solve

3(y -4)= -6

3y – 12 = -6

 y = 2

Or you could have divide both sides by 3 FIRST

y - 4 = -2

y = 2

Algebra ( Period 1)

Chapter 3-2 Solving Linear Equations by Graphing

We need LOTS of graph paper. YOU must graph on graph paper—using a ruler or a straight edge! Make sure to label your x and y axes!  Put arrows on them!

Linear function: A line in the format:

f(x) = x or y = x

This is called the PARENT GRAPH

This parent graph has a FAMILY of GRAPHS related to it that has similar characteristics but is in someway different 
The Slope is Different
The y intercept is Different

The ROOT of the function or line is the X – intercept of the graph  It is called a ZERO on the graphing calculators. To find the root, find the value of x that makes the equation true when the y value is 0.

Linear functions ( equations) have at most 1  ROOT ( solution) because once the line intercepts the  x-axis it cannot curve around and intercept it again

Again, the FUNCTION is the ENTIRE GRAPH … and is in the form f(x) = x   or y = x

The linear EQUATION related to the function is only concerned with one value, the x- intercept.  The y value would be ZERO on the x-axis so you set the function = 0 and solve!

Here are the synonyms:
x-intercept= the solution = the root = the zero

 If you graph the function
f(x) = 2x – 8, you will see the x intercept is ( 4, 0)

Therefore, the solution, the root, the zero of the function is 4.

set f(x)  or y = 0
2x – 8 = 0
2x = 8
x = 4

You can solve a linear function 2 ways:

Graphically- Graph the function and read the x-intercept
Algebraically- Set y or f(x) equal to 0 and solve for x

Notice you are solving multi-step equation but now the value means that you found the root of the function. How often will you be able to read the exact answer from a graph? NOT OFTEN!

Therefore we usually solve for the root Algebraically!

Example:
Find the root or zero of y = 20- .75x

set y = 0

0 = 20 - .75x

x = 26 2/3

Algebra Honors ( Period 4 & 7)

Chapter 3-2 Solving Linear Equations by Graphing

We need LOTS of graph paper. YOU must graph on graph paper—using a ruler or a straight edge! Make sure to label your x and y axes!  Put arrows on them!

Linear function: A line in the format:

f(x) = x or y = x

This is called the PARENT GRAPH

This parent graph has a FAMILY of GRAPHS related to it that has similar characteristics but is in someway different 
The Slope is Different
The y intercept is Different

The ROOT of the function or line is the X – intercept of the graph  It is called a ZERO on the graphing calculators. To find the root, find the value of x that makes the equation true when the y value is 0.

Linear functions ( equations) have at most 1  ROOT ( solution) because once the line intercepts the  x-axis it cannot curve around and intercept it again

Again, the FUNCTION is the ENTIRE GRAPH … and is in the form f(x) = x   or y = x

The linear EQUATION related to the function is only concerned with one value, the x- intercept.  The y value would be ZERO on the x-axis so you set the function = 0 and solve!

Here are the synonyms:
x-intercept= the solution = the root = the zero

 If you graph the function
f(x) = 2x – 8, you will see the x intercept is ( 4, 0)

Therefore, the solution, the root, the zero of the function is 4.

set f(x)  or y = 0
2x – 8 = 0
2x = 8
x = 4

You can solve a linear function 2 ways:

Graphically- Graph the function and read the x-intercept
Algebraically- Set y or f(x) equal to 0 and solve for x

Notice you are solving multi-step equation but now the value means that you found the root of the function. How often will you be able to read the exact answer from a graph? NOT OFTEN!

Therefore we usually solve for the root Algebraically!

Example:
Find the root or zero of y = 20- .75x

set y = 0

0 = 20 - .75x

x = 26 2/3

Algebra (Period 1)

Chapter 3-1 Graphing Linear Equations

There are FOUR types of linear graphs and this chapter begins with an  OVERALL, BIG  picture

Positive Slope- slants up from left to right
Negative Slope- slants down from left to right
Horizontal line- stays flat from left to right ( constant function)
Vertical Line- stays straight up and down ( Not a function—why??)

Somethings to look for:
Domain
Range
End behavior
Intercepts
Extrema
Positive/Negative
Increasing/Decreasing
Symmetry

A Linear Equation is an equation that forms a line when it is graphed. Linear equations are often written in the form Ax + By = C
This is called standard form. In this equation C is called  a constant  Ax and By are variable terms.

A ≥ 0
A and B BOTH cannot be 0
A, B,and C are ALL integers with a GCF= 1

If you see a term such as xy attached to together it cannot be a linear equation. If the exponent on a variable is different than the understood 1,  it is not a linear equation

in 3x + 2y = 5

A = 3
B = 2
C = 5

In x = -7 ( Yes that is in Standard Form)

A = 1
B = 0
C = -7

Identify Linear Equations

Determine whether each equation is  a linear equation. Write the equation in Standard form
y = 4 – 3x   YES

To put this equation in standard form, we need to move the -3x term to the other side, using the  Addition Property of Equality and the Additive Inverse Property.  So that the x and y values are on the SAME side and the constant is always on the other side to the right of the equal sign.
3x + y = 4
A = 3
B = 1
C = 4

6x –xy = 4   NO

the term xy has two variables the equation cannot be written in AX + By = C . It is not a linear equation

(1/3)y = -1  Yes

It becomes y = -3

A= 0
B = 1
C = -3

A linear equation can be represented on a coordinate graph. The x- coordinate of the point at which the graph of the equation crosses the x-axis is called the x-intercept. The y- coordinate of the point at which the graph of the equation crosses the y-axis is called the y-intercept.

The graph of  linear equation has AT MOST one x- intercept and ONE y-intercept ( unless it is the equation x = 0, which is the y-axis or y = 0, which is the x-axis. In those two special cases every number is a y-intercept or an x-intercept, respectively)

Real World Example  Swimming Pool Page 157 in your textbook

A swimming pool is being drained at a rate of 720 gallons per hour. The table on Page 157 shows the function relating the volume of water in a pool and the time in hours that the pool has been draining.

Find the x- and y- intercepts on the graph of the function.

Looking at the table we see that the x intercept is 14 ( that is when y is 0)
and the y-intercept is 10,080 ( that is the value of y, when x = 0)

Describe what the intercepts mean in this situation: This should remind you of our unit at the beginning of the year!

The x intercept 14 means that after 14 hours the pool is completed drained because it has a volume of 0 gallons!

The y- intercept of 10,080 means that the pool contained 10,080 gallons of water at time 0 ( or before it started to drain)

Graph by Using Intercepts
Graph 2x + 4y = 16 using just the x-intercept and y-intercept

2x + 4(0) = 16   replace y with 0 (or as taught in class cover over the y value and solve)

2x = 16 so x = 8 ( when y = 0) ( 8,0)

This means the graph intersects the x-axis at (8,0)

Now

2(0) + 4y = 16  replace x with 0 ( or as taught in class- cover over the x value and solve)

4y = 16
y = 4  ( when x = 0)  ( 0, 4)

This means the graph intersect the x-axis at (0, 4)

Plot these two point and draw a line through them

Notice that this has both an x- intercept and  y-intercept

Some lines have only an x- intercept and NO y-intercept  or vice versa

y = b is a horizontal line that has only a y- intercept (unless b=0)

The graph of x = a is a vertical line that has only an x- intercept (unless a = 0)

Lines that are neither vertical or horizontal cannot have more than one x- and/or y-intercept.

Graphing Using an XY Table

Another way to graph is choosing random x values , plugging those into the equation to find the corresponding y values, and graphing those points you found.

Although 2 points determine a line, it is always best to find 3 points so that you are sure you did not make a mistake on either of the first two points.

If the coefficient of x is a fraction, select a value that is  multiple of the denominator so hopefully you won’t end up with fractions to graph! 

Algebra Honors ( Periods 4 & 7)

Chapter 3-1 Graphing Linear Equations

There are FOUR types of linear graphs and this chapter begins with an  OVERALL, BIG  picture

Positive Slope- slants up from left to right
Negative Slope- slants down from left to right
Horizontal line- stays flat from left to right ( constant function)
Vertical Line- stays straight up and down ( Not a function—why??)

Somethings to look for:
Domain
Range
End behavior
Intercepts
Extrema
Positive/Negative
Increasing/Decreasing
Symmetry

A Linear Equation is an equation that forms a line when it is graphed. Linear equations are often written in the form Ax + By = C
This is called standard form. In this equation C is called  a constant  Ax and By are variable terms.

A ≥ 0
A and B BOTH cannot be 0
A, B,and C are ALL integers with a GCF= 1

If you see a term such as xy attached to together it cannot be a linear equation. If the exponent on a variable is different than the understood 1,  it is not a linear equation

in 3x + 2y = 5

A = 3
B = 2
C = 5

In x = -7 ( Yes that is in Standard Form)

A = 1
B = 0
C = -7

Identify Linear Equations

Determine whether each equation is  a linear equation. Write the equation in Standard form
y = 4 – 3x   YES

To put this equation in standard form, we need to move the -3x term to the other side, using the  Addition Property of Equality and the Additive Inverse Property.  So that the x and y values are on the SAME side and the constant is always on the other side to the right of the equal sign.
3x + y = 4
A = 3
B = 1
C = 4

6x –xy = 4   NO

the term xy has two variables the equation cannot be written in AX + By = C . It is not a linear equation

(1/3)y = -1  Yes

It becomes y = -3

A= 0
B = 1
C = -3

A linear equation can be represented on a coordinate graph. The x- coordinate of the point at which the graph of the equation crosses the x-axis is called the x-intercept. The y- coordinate of the point at which the graph of the equation crosses the y-axis is called the y-intercept.

The graph of  linear equation has AT MOST one x- intercept and ONE y-intercept ( unless it is the equation x = 0, which is the y-axis or y = 0, which is the x-axis. In those two special cases every number is a y-intercept or an x-intercept, respectively)

Real World Example  Swimming Pool Page 157 in your textbook

A swimming pool is being drained at a rate of 720 gallons per hour. The table on Page 157 shows the function relating the volume of water in a pool and the time in hours that the pool has been draining.

Find the x- and y- intercepts on the graph of the function.

Looking at the table we see that the x intercept is 14 ( that is when y is 0)
and the y-intercept is 10,080 ( that is the value of y, when x = 0)

Describe what the intercepts mean in this situation: This should remind you of our unit at the beginning of the year!

The x intercept 14 means that after 14 hours the pool is completed drained because it has a volume of 0 gallons!

The y- intercept of 10,080 means that the pool contained 10,080 gallons of water at time 0 ( or before it started to drain)

Graph by Using Intercepts
Graph 2x + 4y = 16 using just the x-intercept and y-intercept

2x + 4(0) = 16   replace y with 0 (or as taught in class cover over the y value and solve)

2x = 16 so x = 8 ( when y = 0) ( 8,0)

This means the graph intersects the x-axis at (8,0)

Now

2(0) + 4y = 16  replace x with 0 ( or as taught in class- cover over the x value and solve)

4y = 16
y = 4  ( when x = 0)  ( 0, 4)

This means the graph intersect the x-axis at (0, 4)

Plot these two point and draw a line through them

Notice that this has both an x- intercept and  y-intercept

Some lines have only an x- intercept and NO y-intercept  or vice versa

y = b is a horizontal line that has only a y- intercept (unless b=0)

The graph of x = a is a vertical line that has only an x- intercept (unless a = 0)

Lines that are neither vertical or horizontal cannot have more than one x- and/or y-intercept.

Graphing Using an XY Table

Another way to graph is choosing random x values , plugging those into the equation to find the corresponding y values, and graphing those points you found.

Although 2 points determine a line, it is always best to find 3 points so that you are sure you did not make a mistake on either of the first two points.

If the coefficient of x is a fraction, select a value that is  multiple of the denominator so hopefully you won’t end up with fractions to graph! 

Algebra Honors ( Period 4 & 7)

Inequalities Involving Absolute Value 5-5

The inequality │x│< 3 means that the distance between x and 0 is less than 3

Graph:

so x > -3 and x <  3

The set builder notation or solution set is {x │ -3 < x < 3}

When solving absolute value inequalities there are two cases to consider:

Case 1 The expression inside the absolute value symbols is nonnegative

Case 2  The expression inside the absolute value symbol is negative

The solution is the intersection of these two cases.

When the absolute value inequality is less than… I think of “less thAND” … it is the intersection of two parts. It is the “YO”  we talked about in class

│m + 2 │ < 11

Rewrite  │m + 2 │ < 11       for both the above cases

m + 2 < 11                   and            -(m+2)  < 11

m  < ; 9                   this one  becomes m + 2 >; -11

m < ; 9     and     m >  -13

or think m + 2 < 11   AND  -11 < m + 2

The solution set is { m │ -13 < m <; 9}

│y -1│ <  -2    WAIT… this can NEVER be TRUE. There is no solution The solution set is the empty set.  {  }  or

When the absolute value inequality is a greater than… I think of  “greatOR”  it is the union
of two parts..  It is the “DORKY DANCER we talked about in class… going one way and then the other.
│x│ > 3 means that the distance between x and 0 is greater than 3…

Graph:

so x <  -3 OR  x >; 3 The solution set is { x │ x < -3 or x >  3}

We must consider two cases always
Case 1 The expression inside the absolute value symbols is nonnegative
Case 2 The expression inside the absolute value symbols is negative

Solve      │3n + 6│≥ 12

Case 1
3n + 6 is non negative

3n + 6 ≥ 12              n ≥ 2        That was easy

Case 2
3n + 6 is  negative

The book sets it up  -(3n + 6) ≥ 12

That would mean    3n + 6 ≤ -12

n  ≤ -6     so

 n  ≥2   OR   n  ≤ -6

The solutions set is { n │ n  ≥2   OR   n  ≤ -6}

Graph   

Algebra Honors ( Periods 4 & 7)

Multiplication Properties of Exponents 7-1

Monomial: A number, variable, or product of a number and variables with NON-NEGATIVE INTEGER EXPONENTS.

Negative integer exponents mean that a variable is in the denominator. Numbers can be in the denominator.

Integer exponents mean that you can’t have variables with square roots or other roots (these would be fractional exponents)

Therefore, monomials are ONE TERM and terms are separated by addition or subtraction NOT multiplication or division.

A constant is a monomial that is a real number (it can be negative, positive, a fraction/decimal or in a radical sign)

Linear expressions have each variable to the 1 power. Nonlinear expressions have either one variable to a power of 2 or more OR multiple variables attached together.

The base of an exponent is the number or variable at the bottom.

The exponent is the little superscript number at the top.

This is called exponential form or a power of the base raised to the specific exponent.

Expanded form is when you show the repeated multiplication.

Standard or simplified form is the number answer (simplified for a variable is the same as the exponential)

3⁴ is exponential form or we say it’s 3 raised to the power of 4

3●3●3●3 is expanded form

81 is standard form

ODD/EVEN RULES WITH POWERS AND NEGATIVE:

An odd number of negatives = negative

An even number of negatives = positive

So

An odd power with a negative integer in a ( ) = negative

An even power with a negative integer in a ( ) = positive

BUT

An EVEN power with a negative power WITHOUT ( ) = NEGATIVE…there’s only ONE negative here and that’s odd…I call this negative the ZAPPER because it zaps the answer at the very end of the simplifying

An odd power without ( ) = still negative…there’s only ONE negative here and that’s odd

EXAMPLES:

EVALUATING WITH POWERS:

If you are given a variable to a power, you simply plug and chug the value given for the variable.

USUALLY YOU SHOULD PLACE THE VARIABLE IN ( ) WHEN PLUGGING IN:

a² – b⁴ if a = 2 and b =3

(2) ² – (3) ⁴ = 4 - 81 = -77

VS this case where you’re doing an operation INSIDE the (  ) FIRST, then doing the power:

(a – b) ⁴ = (2 – 3) ⁴ = (-1)⁴ = 1

Algebra ( Period 1)

Multiplication Properties of Exponents 7-1

Monomial: A number, variable, or product of a number and variables with NON-NEGATIVE INTEGER EXPONENTS.

Negative integer exponents mean that a variable is in the denominator. Numbers can be in the denominator.

Integer exponents mean that you can’t have variables with square roots or other roots (these would be fractional exponents)

Therefore, monomials are ONE TERM and terms are separated by addition or subtraction NOT multiplication or division.

A constant is a monomial that is a real number (it can be negative, positive, a fraction/decimal or in a radical sign)

Linear expressions have each variable to the 1 power. Nonlinear expressions have either one variable to a power of 2 or more OR multiple variables attached together.

The base of an exponent is the number or variable at the bottom.

The exponent is the little superscript number at the top.

This is called exponential form or a power of the base raised to the specific exponent.

Expanded form is when you show the repeated multiplication.

Standard or simplified form is the number answer (simplified for a variable is the same as the exponential)

3⁴ is exponential form or we say it’s 3 raised to the power of 4

3●3●3●3 is expanded form

81 is standard form

ODD/EVEN RULES WITH POWERS AND NEGATIVE:

An odd number of negatives = negative

An even number of negatives = positive

So

An odd power with a negative integer in a ( ) = negative

An even power with a negative integer in a ( ) = positive

BUT

An EVEN power with a negative power WITHOUT ( ) = NEGATIVE…there’s only ONE negative here and that’s odd…I call this negative the ZAPPER because it zaps the answer at the very end of the simplifying

An odd power without ( ) = still negative…there’s only ONE negative here and that’s odd

EXAMPLES:

EVALUATING WITH POWERS:

If you are given a variable to a power, you simply plug and chug the value given for the variable.

USUALLY YOU SHOULD PLACE THE VARIABLE IN ( ) WHEN PLUGGING IN:

a² – b⁴ if a = 2 and b =3

(2) ² – (3) ⁴ = 4 - 81 = -77

VS this case where you’re doing an operation INSIDE the (  ) FIRST, then doing the power:

(a – b) ⁴ = (2 – 3) ⁴ = (-1)⁴ = 1

Math 6H ( Period 5)

Equivalent Ratios in the Real World 1-6

There are 2 ways to determine if 2 ratios are equivalent:

1. Restate them both as unit rates. If they’re the same unit rates, they’re equivalent.

2. Use equivalent fractions if finding the unit rate is difficult (let’s say you need to go several decimal places in the division and don’t have a calculator)

Example using both methods:

You know that one store will charge you $2 for 10 photo prints and another has a sign offering 30 prints for $6.

Are these 2 stores charging EQUIVALENT AMOUNTS?

First way: Unit Rates

The unit rates are the same:

You can either find the prints per dollar or the unit price per print.

Both will show that the stores are equivalent.

Prints per dollar:

10 prints/$2 = 5 prints/$1 and 30 prints/$6 = 5 prints/$1 as well

Unit price:

$2/10 prints = $.20/print and $6/30 prints = $.20/print as well

Second way: Equivalent Fractions

The equivalent fraction approach asks you to see if you can find a common factor that the numerator and denominator were both either multiplied by or divided by to get to each other:

Can I get from 10/2 to 30/6 by multiplied both the numerator and denominator by the same number?

Yes I can!

I can multiply by 3 (scale forward by 3)

When I do this, it’s helpful to show a curved arrow with the x 3 on each arrow:

So by using equivalent fractions, the 2 stores are offering the same deal.

Algebra (Period 1)

 LITERAL EQUATIONS AND DIMENSIONAL ANALYSIS 2-8 

We’ve already talked about FORMulas being equations with KNOWN RELATIONSHIPS

The Common Core lingo for a formula is LITERAL EQUATION

Many times, you’ll need to solve for one of the variables.

Example: d = rt
Sometimes, you want to solve for distance, but other times you need the time or the rate.
You can manipulate the variables by balancing the equation until you solve for the wanted variable.
In the formula, d = rt, to solve for rate, divide both sides by t
To solve for time, divide both sides by r
Don't think of this as 3 different equations!
Just learn the main one and use that to solve for what you need!

Example: Solve for l:
P = 2l + 2w
Subtract 2w for both sides: P - 2w = 2l
Divide by 2 on each side:
P - 2w = l
2

When the variable is in the denominator, it's usually easiest to use cross products:
Solve for x:

3z = 4
x      y

Cross products:
3yz = 4x

Divide both sides by 4:
x = 3yz
       4

If you have a fraction, you can simply use the multiplicative inverse:
Solve for b:
3ab = 7c

4          

Either use cross products or multiply each side by 4/3a:
b = 7c (4/3a) = 28c/3a

Why can't you use cross products for the following?
Solve for f:
d = 2a + 2b

      c f  

Algebra ( Period 1)

 ABSOLUTE VALUE EQUATIONS 2-5

 When you plug into an expression with absolute value, the absolute value signs function as parentheses in Order of Operations.

So make sure you simplify INSIDE before turning that POSITIVE!

Generally, you solve these the same way you solve regular equations.
 Make sure you balance equally on both sides!

 Follow the steps of a 2-step equation.
 1. Add the opposite (you can subtract as well)
 2. Multiply by the reciprocal (you can divide as well)

 THE DIFFERENCE?
 YOU HAVE 2 POSSIBLE ANSWERS! (+ and -)

 EXAMPLE: 2 IxI + 1 = 15
 2 IxI  + 1 - 1 = 15 - 1
 2 IxI  = 14
 1/2 ( 2 IxI  ) = 1/2 (14)
  IxI  = 7
 x = {-7, 7}

 REMEMBER, IF YOU AFTER YOU GET THE ABSOLUTE VALUE ALONE ON ONE SIDE, YOU FIND THAT THE CONSTANT ON THE OTHER SIDE IS NEGATIVE, 

THE ANSWER IS THE NULL SET!

 EXAMPLE: 2 IxI + 16 = 15
 2 IxI + 1 - 1 = 15 - 16
 2 IxI= -1
 1/2 ( 2 IxI ) = 1/2 (-1)
  IxI = -1/2
 NOT POSSIBLE! So the answer is the null set

Algebra ( Period 1)

SOLVING EQUATIONS WITH VARIABLE ON BOTH SIDES 2-4 

COLLECTING TERMS FIRST:
Sometimes, you will have to COLLECT LIKE TERMS ON THE SAME SIDE OF THE EQUATION before balancing:

8y + 12 – (-2y) = -6

10y + 12 = -6

10y = -18

y = -18/10 =  -9/5

TWO STEPS WITH DISTRIBUTIVE PROPERTY
Usually, you want to do DISTRIBUTE FIRST!
UNLESS THE FACTOR OUTSIDE THE ( ) CAN BE DIVIDED
OUT OF BOTH SIDES PERFECTLY!!!!

EXAMPLE:
5y - 2(2y + 8) = 16
5y - 4y - 16 = 16 [distribute]
y - 16 = 16 [collect like terms]
y = 32 [solve by adding 16 to both sides]

EXAMPLE WHEN YOU DON'T NEED TO DISTRIBUTE FIRST:
-3(4 + 3x) = -9
4 + 3x = 3 [Don't distribute! Divide by -3. The -3 goes into both sides perfectly!)
3x = -1 [Subtract 4 from both sides]
x = -1/3 [Divide both sides by 3]

REVIEWED: IDENTITY OR NO POSSIBLE SOLUTION EQUATIONS:

An identity equation is where ANY NUMBER can be substituted for the VARIABLE, the equation will be TRUE. What will happen is that while you’re balancing the equations, you will ultimately end up with the SAME EXACT EXPRESSION ON EACH SIDE of the equation.

 

You can keep going, but as soon as you have the same thing on both sides, you know you have an IDENTITY

A no possible solution equation is one where no matter what number you substitute into the equation, the equation will be FALSE. What will happen is that while you’re balancing the equations, you will ultimately end up with one number will equal a DIFFERENT number (which can never be true).

 

NOTICE SOMETHING ELSE ABOUT SOLVING EQUATIONS IN GENERAL:

WHENEVER YOU HAVE THE SAME EXACT TERM WITH THE SAME SIGN ON DIFFERENT SIDES OF THE EQUATION, YOU CAN SIMPLY CROSS THEM OUT BECAUSE  WHEN YOU USE THE ADDITIVE INVERSE PROPERTY ON BOTH SIDES TO BALANCE, BOTH TERMS WILL DROP OUT!

VARIABLES ON BOTH SIDES:

Simplify each side of the equation first.
Then use the ADDITIVE INVERSE PROPERTY to move variables to the other side of the equation so that all variables are on the same side.
Usually, we try to move the smaller coefficient to the larger because sometimes that avoids negative coefficients,

BUT that is not always the case, and you may move to whatever side you choose!
EXAMPLE:
3y - 10 - y = -10y + 12
2y - 10 = -10y + 12
+10y +10y
12y - 10 = 12
+ 10 +10
12y = 22
12     12
y = 11/6

FINDING THE VALUE OF AN UNKNOWN SO THAT 2 PERIMETERS OR AREAS ARE THE SAME:

This type of problem is a perfect example of using the Distributive Property with variable on both sides of an equation.

Example 4 on p. 99

You have 2 rectangles whose areas are the same. One rectangle has sides of x and 10 cm. and the other rectangle has sides of x + 3 and 6 cm.

Set up the following equation and solve:

10x = 6(x + 3)

10x = 6x + 18

4x = 18

x = 18/4 = 9/2 cm

CHECK THAT THE RECTANGLES DO HAVE THE SAME AREA IF x = 9/2 OR 4.5 cm

First rectangle: Sides are 4.5 and 10 so A = (4.5)(10) = 45 cm2

Second rectangle: Sides are 4.5 + 3 or 7.5 cm and 6 cm. so A = (7.5)(6) = 45 cm2

You have 2 rectangles whose perimeters are the same. One rectangle has sides of x and 6 cm. and the other rectangle has sides of 2x + 2 and x cm.

Set up the following equation and solve:

2x + 2(6) = 2(2x + 2) + 2x

2x + 12 = 4x + 4 + 2x

2x + 12 = 6x + 4

12 = 4x + 4

8 = 4x

x = 2

CHECK THAT THE RECTANGLES DO HAVE THE SAME PERIMETER IF x = 2 cm

First rectangle: Sides are 2 and 6 so P = 2(2) + 2(6) = 16 cm

Second rectangle: Sides are 2 and 2(2) + 2 = 6 so P = 2(2) + 2(6) = 16