Math 6H ( Period 1, 2, & 3)

Triangles 4-4
A triangle is the figure formed when three points, not on a line are jointed by segments.

Triangle ABC ΔABC
Each of the Points A, B, C is called a vertex
(plural: Vertices) of ΔABC

Each of the angles angle A. angle B. and angle C is called an angle of ΔABC

In any triangle-
The sum of the lengths of any two sides is greater than the length of the third side
The sum of the measures of the angles is 180

There are several ways to name triangles. One way is by angles

Acute Triangle
3 acute angles

Right Triangle
1 right angle

Obtuse Triangle
1 obtuse angle

Triangles can be classified by their sides

Scalene Triangle
no 2 sides congruent

Isosceles Triangle
at least 2 sides congruent

Equilateral Triangle
all 3 sides congruent


The longest side of a triangle is opposite the largest angle and the shortest side is opposite the smallest angle. Two angles are congruent if and only if the sides opposite them are congruent.

Algebra Honors (Period 6 & 7)

Inequalities in One Variable
Solving Problems Involving  Inequalities 10-3

For practice, we went through the examples in our textbook on Page 469
We discovered that reading and re-reading the problem was critical to make sure we answered the exact question.  As noted in Example 1: the question asked what is the minimum total distance, to the nearest mile, that she will have to travel...?"  The critical part, was "to the nearest mile."  Please read the problem and then realize  why re arrived at the following:
Let d = the distance fro the sign to home
d - 16 > 25
solving that open sentence we get
d > 41
Since the distance needs to be greater than 41, the next whole number is 42 so the answer is
The minimum distance she will travel is 42 miles.

To translate phrases such as "is at least" and "is no less than"  you will need   ≥ 
...think I want at least $200 when going to Disneyland. I obviously want more.. but I will be happy with $200.

To translate phrases such as "is at most" and "is no more than"  you will need   ≤
...think I want at most 7 problems of homework. I really want fewer than 7 but I'll be okay with 7.

Algebra Honors (Period 6 & 7)

Inequalities in One Variable
Solving Inequalities 10-2


Property of Comparison
For all real numbers a and b, one and only one of the following statements is true:

a < b,            a = b,       or a >; b

Transitive Property of Order
For all real  numbers a, b, and c :

1. If a < b and b < c , then  a <; c
2. If a > b, and b > c, then a > c

Addition Property of Order
For all real  numbers a, b, and c :

1. If  a < b, then a + c < b + c
2. If a > b, then a + c > b + c

Multiplication Property of Order


For all real  numbers a, b, and c such that
c > 0 ( c is positive)

1. If a < b, then ac < bc
2. If a > b then ac > bc

c < 0 ( c is negative)

1. If a < b, then ac > bc
2. If a > b, then ac < bc

Multiplying each side of an inequality by a negative number reverses the direction or order of the inequality.

These properties guarantee that the following transformations of a given inequality will always produce an equivalent inequality

1. Substituting for either side of the inequality an expression equivalent to that side
2. Adding to (or subtracting from) each side of the inequality by the same real number
3. Multiplying (or dividing) each side of the inequality by the same positive number.
4. Multiplying  or dividing) each side of the inequality by the same negative number AND  reversing the direction of the inequality. 

To solve an inequality you use the same steps used to solve equations

1. Simplify each side of the inequality as needed
2. Use the inverse operations to undo any additions or subtractions
3. Use the inverse operations to undo any multiplications or divisions

Remember when graphing these inequalities a closed dot indicates that the number is included while an open dot indicates a less than or a greater than.

When working with inequalities it is important to read both the symbols and the words slowly and carefully!!

Word problems involving inequalities also require very careful reading. An important step to solving this type of problem is determining which inequality symbol to use. Before you write your inequality you should be certain that you will use the correct symbol.

Math 6H ( Period 1, 2, & 3)

Angles and Angle Measure 4-3
An angle is a figure formed by two rays with the same endpoints. The common endpoint is called the vertex. The rays are called the sides.
We may name an angle by giving its vertex letter if this is the only angle with that vertex, or my listing letters for points on the two sides with the vertex letter in the middle. We use the symbol from the textbook.

To measure segments we use a rule to mark off unit lengths. To measure angles, we use a protractor that is marked off in units of angle measure called degrees.

To use a protractor, place its center point at the vertex of the angle to be measured and one of its zero points on the side.


We often label angels with their measures. When angles have equal measures we can write m angle A = m angle B
We say that angle A and angle B are congruent angles


If two lines intersect so that the angles they form are all congruent, the lines are perpendicular. We use the symbol that looks like an upside down capital T to mean “is perpendicular to.”



Angles formed by perpendicular lines each have measure of 90° . A 90° angle is called a right angle. A small square is often used to indicate a right angle in a diagram

An acute angle is an angle with measure less than 90°. An obtuse angle has measure between 90° and 180°



Two angles are complementary if the sum of the measures is 90°
Two angles are supplementary if the sum of their measures is 180°

Algebra Honors (Period 6 & 7)

Inequalities in One Variable
Order of Real Numbers 10-1

This sections should be review... you have been working with less than and greater than symbols since 6th grade. A number line shows order relationships among all real numbers. The value of a variable may be unknown but you may know that is either greater than or equal to another number.
For example,
x ≥ 5 is read "x is greater than or equal to 5."
x ≥ 5 is another way of writing " x >5 or x = 5"

Translating statements into symbols is a critical concept. Practice these as review
-3 is greater than -5.    -3 > -5
and
x is less than or equal to 8  x    ≤   8

To show that x is between -4 and 2 you write
-4 < x < 2
which is read 
"-4 is less than x and x is less than 2."
or you could read it as
" x is greater than -4 AND less than 2."

The same comparisons are stated in the sentence  2 > x  > -4

When all the numbers are know you can classify the statement as true or false.
Thus,
-4 < 1 < 2   is true
but
-4 < 8 < 2 is false

An inequality is formed by placing an inequality symbol (  > ,  < ,     ≤ , or    ≥) between numerical pr variable expressions-- called the SIDES of the inequality
You solve an inequality by finding the values from the domain of the variable which make the inequality a true statement.   Such values are called the solutions of the inequality. All the solutions make up the solution set of the inequality.

Math 6H ( Period 1, 2, & 3)

Points, Lines, Planes 4-1
We can describe but CANNOT DEFINE point, line or plane in Geometry

We use a single small dot to represent a point and in class we labeled with a P and we called it Point P
A straight line in Geometry is usually just called a line...
Two points DETERMINE exactly ONE LINE

we connected Point P with Point Q and created Line PQ
We placed this type of arrow ↔ over PQ to show a line
↔
PQ

that would represent the line PQ but we found we could write
↔
QP
and mean the SAME line!!

You can name ANY line with ANY TWO points that fall on that line!! USE only TWO points to name a line!!


Three or more points on the same line are called collinear. Notice the word "line" in collinear.
collinear

Points NOT on a same line are called noncollinear.

We have a RAY if we have an endpoint and it extends through other points. We name the rame by Naming the endpoint FIRST
→
PQ is RAY PQ and it begins at P and goes through Q. It is NOT the SAME as

→
QP which is Ray QP, which begins at Q and goes through P

Segments are parts of lines with TWO ENDPOINTS.
⎯
PQ is a segment with endpoints Point P and POint Q

We then looked at the drawing from page 105 and the class named all of the names for the line in the drawing, all of the rays that existed in the figure as well as the segments. We found that there were just 3 collinear points: A, X, B but that we could name 3 sets of non collinear points
X, Y, B and A, X, Y, AND A, B, Y

Three non-collinear points determine a flat surface called a plane.
We name a Plane by using three of its non collinear points!! Plane ABC was out example.

Lines in the same plane that do not intersect are PARALLEL lines. Two segments or rays are parallel if they are parts of parallel lines.
↔
AB is parallel to

↔
CD

may be written
↔ ↔
ABllCD
using two straight lines to indicate parallel

Parallel lines DO NOT intersect.

Intersecting lines intersect in a single point!!



Planes that do not intersect are called parallel planes... we looked around the room and found examples of parts of planes.. noticing which ones were parallel!! (the floor and ceiling were a great example)
Then we drew the box from PAge 106 and identified parallel segments and lines from that box.

Two non parallel lines that do not intersect are called SKEW LINES.