Math 6 Honors ( Periods 1, 2, & 3)

Dividing Decimals 3-9 cont'd

For word Problems use the 5 step plan found on Page 18 of our textbook

296.06 ÷ (18.7 + 3.9)
Following Aunt Sally ( or PEMDAS... remember our singing...
we do the operation inside the hugs!! ( )using a sidebar
18.7 + 3.9 make sure to stack them lining up the decimals and you will get 22.6

296.06 ÷ 22.6

When dividing by a decimal remember the rule from yesterday, multiply the divisor ( 22.6) by a power of ten which makes it a natural number

then use that same power of ten and multiply the dividend,
WHen you divide you have
2960.6 ÷ 226
Please do that problem and your quotient should be 13.1

(47.1 - 16.9) ÷ (21.9 -6.8)
Again you need to do the operations inside the ( ) first. Using a side bar and lining up the decimals
47.1 - 16.9 = 30.2
and 21.9 - 6.8 = 15.1
Just take a look at those two numbers and you will notice a relationship!!
30.2 ÷ 15.1
BUT... practice your division skills and confirm what you can tell...
30.2 ÷ 15.1 = 2



At an average rate of 55 km/hour how long will it take to drive 225 km to the nearest tenth of an hour?

d = rt
What must we find and what are the clues? Well, how long... is usually time and the fact that we need to round to the nearest tenth of an hour indicates we are finding TIME as well.
So what is the distance? 225 km and what is the rate? 55 km/h
so plug into the formula
225= 55t
Now, how do we solve this one step problem?

divide both sides by 55
225/55 = 55t/55

do the division as a side bar

225/55 ≈ 4.09 so
t ≈ 4.1
and the answer is 4.1 hour

Math 6 Honors ( Periods 1, 2, & 3)

Dividing Decimals 3-9

According to our textbook-
In using the division process to divide a decimal by a counting number, place the decimal point in the quotient directly over the decimal point in the dividend.

Check out our textbook for some examples!!

When a division does not terminate-- or does not come out evenly-- we usually round to a specified number of decimal places. This is done by adding zeros to the end of the dividend, which as you know, does NOT change the value of the decimal. We then divide ONE place beyond the specified number of places.

Divide 2.745 by 8 to the nearest thousandths.
See the set up in our textbook on page 89. Notice that they have added a zero and the end of the dividend ( 2.745 becomes 2.7450) because you want to round to the thousandths and we need to go ONE place additional.
DIVIDE carefully!!

the quotient is 0.3431 which rounds to 0.343


To divide one decimal by another

Multiply the dividend and the divisor by a power of ten that makes the DIVISOR a counting number


Divide the new dividend by the new divisor

Check by multiplying the quotient and the divisor.

Math 6 Honors ( Periods 1, 2, & 3)

Multiplying Decimals 3-8

According to our textbook:
Place the decimal point in the product so that the number of places to the right of the decimal point in the product is the sum of the number of places to the right of the decimal point in the factors!!

You do NOT need to line up the decimal point when you are multiplying.

14.92 x 7.2 stack them but do not line up the decimals
= 107.424


11.32 X 8.73

multiply carefully and you get
11.32
8.73

98.8236

estimate and you get 11 X 9 = 99

What would you do if you had
(19.81 x 5.1) + (19.81 X 4.9)

Wait... wait... remember the Distributive Property????
Look you can use it to make this problem soooooo much easier
19.81(5.1 _ 4.9)
19.81 (10) = 198.1


How about 50(.25) + 50(.75)
This is one you can even do in your head because
50(0.25 + 0.75) = 50 (1) = 50


A jet flew 820.3 km/h for 3.2 hours. How far did the jet travel?
We have a great formula distance = rate X time
or d = rt
rate means the speed
so what do we have?
distance = (820.3)(3.2)
First I think I will estimate to make sure I am in the ballpark with my actual answer
I know that 820 (3) = 2460 so I know my answer will be close to 2460 miles-- a little bit more
so when I actually carefully multiply (820.3)(3.2) I get 2624.96 km
so I know my answer is reasonable

Math 6 Honors ( Periods 1, 2, & 3)

Rounding 3-5

Round the following number to the designated place value:
509.690285

tenths: 509.690285
You underline the place value you are rounding to and look directly to the right. If it is 0-4 you round down; if it is 5-9 you round up 1.
so here we round to
509.7

hundredths
509.690285
becomes 509.69

hundred-thousandths
509.690285
becomes
509.69029

tens
509.690285
becomes
510

(a) What is the least whole number that satisfies the following condition?

(b) What is the greatest whole number that satisfies the following condition?
A whole number rounded to the nearest ten is 520.
Well, 515, 516, 517, 58, 519, 520, 521, 522, 523, 524 all would round to 520
so

(a) 515
(b) 524

A whole number rounded to the nearest ten is 650
(a) 645
(b) 654

A whole number rounded to the nearest hundred is 1200
(a) 1150
(b) 1249
How about these...
(a) What is the least possible amount of money that satisfies the following condition?
(b) What is the greatest possible amount?

A sum of money, rounded to the nearest dollar is $57
(a) $56.50
9b) $57.49

A sum of money rounded to the nearest ten dollars $4980
(a) $4975
(b) $4984.99

Math 6 Honors ( Periods 1, 2, & 3)

Decimals 3-3

Although decimals ( termed decimal fractions) had been used for centuries, Simon Stevin in the 16th century began using them on a daily basis and he helped establish their use in the fields of sciences and engineering.

Note that
1/10 = 1/10¹
1/100 = 1/10²
1/1000 = 1/10³

We also know that
1/10= 0.1
1/100 = 0.01
1/1000 = 0.001
1/10000 = 0.0001
and so on... these strings of digits are called decimals.

Remember how we proved that any number to he zero power was equal to 1
or a⁰ = 1

Refer back to your notes or to the blog a few days ago...
we also showed how
What happens when you multiply the same bases?
3⁴ ⋅ 3² = 3⋅3⋅3⋅3⋅3⋅3
or 3⁴⁺² = 3 ⁶
We just add the exponents if the bases are the same!!
When we divide by the same base we just subtract

3⁴ /3² = 3^4-2 =3²

What would happen if we had
3² / 3⁴ ?
Let's look at what we would actually have
3⋅3
3⋅3⋅3⋅3

Which would be
1
3²

or 1/3²

but you can write that as 3^-2
We just subtract-- using the same rule.


Now let's get back to our decimal lesson and apply that to decimals -- and the Powers of TEN

SO 1/10 = 1/10¹= 0.01 and it is equal to 10^-1
Notice that 10^-1 is NOT a negative number-- it is a small number
and 10^-21 is not a negative number it is a VERY TINY number

As with whole numbers, decimals use place values. These place values are to the RIGHT of the decimal point.
We need to be able to write decimals in words as well as expanded notation.
In class we used 0.6394 as our example

zero and six thousand three hundred ninety-four ten-thousandths.

Notice how this number when written in words begins...with "ZERO AND"
Why do we need to do that?

Also notice that there is a hyphen between ten and thousandths in ten-thousandths. It is critical to understand when you must place a hyphen.
We read the entire number to the right of the decimal point as if it represented a whole number, and then we give the place value of the digit farthest to the right.

So, although 0.400 is equivalent to 0.4
we must read 0.400 as "zero and four hundred thousandths."

Now look at the following words
"zero and four hundred-thousandths." What is the subtle difference between those two phrases above?
There is a hyphen in the last phrase-- which means that the hundred and the thousandths are attached and represent a place value so

zero and four hundred-thousandths is 0.00004 while
zero and four hundred thousandths is 0.400

Carefully see the distinction!!

Getting back to our 0.6394

to write it in decimals sums and then in exponents:
0 + 0.6 + 0.03 + 0.009 + 0.0004

0 + 6(0.1) + 3(0.01) +9(0.001) + 4(0.0001)

0(10⁰) + 6(10^-1)+ 3(10^-2)+ 9(10^-3)+ 4(10^-4)

14.35 is read as fourteen AND thirty-five hundredths.
When reading numbers, only use the AND to indicate the decimal point

Math 6 Honors ( Periods 1, 2, & 3)

Decimals 3-3

Although decimals ( termed decimal fractions) had been used for centuries, Simon Stevin in the 16th century began using them on a daily basis and he helped establish their use in the fields of sciences and engineering.

Note that
1/10 = 1/10¹
1/100 = 1/10²
1/1000 = 1/10³

We also know that
1/10= 0/1
1/100 = 0.01
1/1000 = 0.001
1/10000 = 0.0001
and so on... these strings of digits are called decimals.


SO 1/10 = 1/10¹= 0.01 and it is equal to 10^-1
Notice that 10^-1 is NOT a negative number-- it is a small number
and 10^-21 is not a negative number it is a VERY TINY number

AS with whole numbers, decimals use place values. These place values are to the RIGHT of the decimal point.
We need to be able to write decimals in words as well as expanded notation.
In class we used 0.6394 as our example

zero and six thousand three hundred ninety-four ten-thousandths.

Notice how this number when written in words begins...with "ZERO AND"
Why do we need to do that?

Also notice that there is a hyphen between ten and thousandths in ten-thousandths. It is critical to understand when you must place a hyphen.
We read the entire number to the right of the decimal point as if it represented a whole number, and then we give the place value of the digit farthest to the right.

So, although 0.400 is equivalent to 0.4
we must read 0.400 as "zero and four hundred thousandths."

Now look at the following words
"zero and four hundred-thousandths." What is the subtle difference between those two phrases above?
There is a hyphen in the last phrase-- which means that the hundred and the thousandths are attached and represent a place value so

zero and four hundred-thousandths is 0.00004 while
zero and four hundred thousandths is 0.400

Carefully see the distinction!!

Getting back to our 0.6394

to write it in decimals sums and then in exponents:
0 + 0.6 + 0.03 + 0.009 + 0.0004

0 + 6(0.1) + 3(0.01) +9(0.001) + 4(0.0001)

0(10⁰) + 6(10^-1)+ 3(10^-2)+ 9(10^-3)+ 4(10^-4)

14.35 is read as fourteen AND thirty-five hundredths.
When reading numbers, only use the AND to indicate the decimal point

Math 6H ( Periods 3, 6, & 7)

Decimals 3-3

Although decimals ( termed decimal fractions) had been used for centuries, Simon Stevin in the 16th century began using them on a daily basis and he helped establish their use in the fields of sciences and engineering.

Note that
1/10 = 1/10¹
1/100 = 1/10²
1/1000 = 1/10³

We also know that
1/10= 0/1
1/100 = 0.01
1/1000 = 0.001
1/10000 = 0.0001
and so on... these strings of digits are called decimals.

Remember how we proved that any number to he zero power was equal to 1
or a⁰ = 1

Refer back to your notes or to the blog a few days ago...
we also showed how
What happens when you multiply the same bases?
3⁴ ⋅ 3² = 3⋅3⋅3⋅3⋅3⋅3
or 3⁴⁺² = 3 ⁶
We just add the exponents if the bases are the same!!
When we divide by the same base we just subtract

3⁴ /3² = 3^4-2 =3²

What would happen if we had
3² / 3⁴ ?
Let's look at what we would actually have
3⋅3
3⋅3⋅3⋅3

Which would be
1
3²

or 1/3²

but you can write that as 3^-2
We just subtract-- using the same rule.


Now let's get back to our decimal lesson and apply that to decimals -- and the Powers of TEN

SO 1/10 = 1/10¹= 0.01 and it is equal to 10^-1
Notice that 10^-1 is NOT a negative number-- it is a small number
and 10^-21 is not a negative number it is a VERY TINY number

AS with whole numbers, decimals use place values. These place values are to the RIGHT of the decimal point.
We need to be able to write decimals in words as well as expanded notation.
In class we used 0.6394 as our example

zero and six thousand three hundred ninety-four ten-thousandths.

Notice how this number when written in words begins...with "ZERO AND"
Why do we need to do that?

Also notice that there is a hyphen between ten and thousandths in ten-thousandths. It is critical to understand when you must place a hyphen.
We read the entire number to the right of the decimal point as if it represented a whole number, and then we give the place value of the digit farthest to the right.

So, although 0.400 is equivalent to 0.4
we must read 0.400 as "zero and four hundred thousandths."

Now look at the following words
"zero and four hundred-thousandths." What is the subtle difference between those two phrases above?
There is a hyphen in the last phrase-- which means that the hundred and the thousandths are attached and represent a place value so

zero and four hundred-thousandths is 0.00004 while
zero and four hundred thousandths is 0.400

Carefully see the distinction!!

Getting back to our 0.6394

to write it in decimals sums and then in exponents:
0 + 0.6 + 0.03 + 0.009 + 0.0004

0 + 6(0.1) + 3(0.01) +9(0.001) + 4(0.0001)

0(10⁰) + 6(10^-1)+ 3(10^-2)+ 9(10^-3)+ 4(10^-4)

14.35 is read as fourteen AND thirty-five hundredths.
When reading numbers, only use the AND to indicate the decimal point